This was definitely the way to go to get the thick grease off quickly although the beading water on parts of the frame told me there was still a film of something left behind. I used it on my car trailer and most recently I coated the floor in my 40 Ford with it, here is a pic... As a registered member, you'll be able to: - Participate in all Tacoma discussion topics. Kbs rust seal over paint home depot. I believe you have to put "samba10" in the coupon area when ordering. I didn't have much daylight to play with each day so I worked on this every day after work, then took Friday off to get the frame coated with the KBS rust paint.
Top-coating RustSeal. If you brush over an area over and over again forcing the solvents out, you run the risk of the brush marks not flowing out as well they are designed to flow out. Campbell Hausfeld & Formula Lubricators, Filters, Regulators & Oil. Do not reduce RustSeal with lacquer thinner. Campbell Hausfeld & Formula Air Reels, Hose & Connectors. High abrasion and chemical resistance. Kbs rust seal over paint sealant. Re-apply often to continually keep the surface wet for a minimum of 10 minutes for smooth or lightly rusted surfaces, 20-40 minutes for moderately rusted surfaces and 1-2 hours for heavily rusted or corroded surfaces. NOTE: It is not necessary to remove every last bit of rust before applying RustSeal. Has anyone heard of KBS Rust Seal and how does it compare to Por 15? For all new, smooth or shiny metal surfaces, we recommend a light scuffing with 400 grit sandpaper followed by AquaKlean and RustBlast systems. So, I got caught by this one. RustSeal's guaranteed rust protective properties, however, will not degrade. You'll need to be careful painting around things like this. For general purpose cleaning, apply liberally and scrub surface for 5-10 minutes.
Please note that a clear topcoat cannot provide the needed UV protection. Remains flexible to expand and contract. For all alloys and non-ferrous metals, AquaKlean application times and dilution rates should be kept to aminimum due to the wide variations in these materials. Always store in a cool dry place. Joined: July 17, 2006. For older applications, lightly sand with 320 grit sandpaper or spray with KBS Fusion Self-Etching Primer to promote good adhesion between the two coatings. While replacing the motor in this 86 GMC, the engine compartment was stripped clean and the frame sealed using the 3 part Frame Coater Kit. I only used a bit less than half the quart of Rustseal. KBS Coatings good deal. How to use RustBlast Powder. Instructional Videos. It has little to no effect when applied to clean rust free metal.
RustSeal is not intended for use as a final finish. In this time I decided to play with the Rustblast a bit to see how effective it really was. For more information go to. I was going to apply the spray on bedliner over the KBS, but it looks so nice I may leave it as is. He took what the old tired brand had and made it better. Do not substitute shaking for stirring.
1) Apply your top coat once the second or final coat of RustSeal is dry-to-the-touch and does not leave a fingerprint (usually 3-6 hours depending on temperature and humidity). Water and air are locked out, therefore oxidation, the precursor to rust, cannot take hold. RustBlast is a powerful rust remover, zinc phosphate pre-primer, and metal etch. SIZE: 250ML, 1L, 4L, 20L, 1KG POWDER. All Makes All Models Parts | KB4302 | KBS RustSeal; Rust Preventive Corrosion Barrier Coating; Satin Black; 16 OZ. Here's the pic I just took of bubbles and no sign of failure. Satin Rustseal (rust paint). Since they recommend doing 2 coats of Rustseal, one pair wasn't enough for 2 coats.
Integrated preparation system. Almost every part on a car except the exhaust! Use KBS #1 Thinner only. Treat the preparation process as you would bodyworking a quarter-panel or a fender: the better the underlying work, the better the end results. Placing paint can upside down for a short time before opening & stirring will aid with proper mixing. KBS Rust Seal | Paint & Chemicals. I was impressed on how this product looked once it was cured. After cleaning up I hit the road for the weekend. I decided to take a chance on a product I knew very little about. Use a scouring pad as needed. If RustSeal should stain your skin, only the course of time will remove it. Be sure to have scraped off any loose rust, mill scale, paint, etc. It's these pooling spots where the bubbles formed in the rust paint. The frame was pretty gummy and there is no way I could have done this with a quart of Aquakleen alone.